子午线轮胎接触变形的非线性有限元分析

李丽娟 刘锋  杨学贵

　　摘要：建立了9.00R20子午线轮胎的有限元分析模型，从轮胎的材料非线性、几何非线性、橡胶帘线复合材料的各向异性，以及橡胶材料的不可压缩性等方面探讨了轮胎与地面的静态接触问题，分析了下沉量、充气压力及静摩擦系数等对轮胎静态接地面内应力应变场的影响。结果表明，在一定的充气压力下，随着下沉量逐渐增大，轮胎接地形状从圆形逐渐变为椭圆形、矩形，接地区应力分布由内高外低逐渐变为内低外高；静态接地时的摩擦力呈对称分布，但摩擦力并不大；带束层和胎圈在接地区域的应力较高，充气压力对发生翘曲时的下沉量有影响，随着充气压力的升高，对应的下沉量降低；下沉量相同时接地面内的最大应力随充气压力的升高而增大。
　　关键词：子午线轮胎；接触变形；非线性有限元分析
　　中图分类号：TQ336.1＋1　　文献标识码：A
　　文章编号：1000－1255（2000）05－0313－04

Nonlinear FEA for contact deflection of radial tire

Li Lijuan　Liu Feng
(Faculty of Construction,Guangdong University of Technology, Guangzhou,Guangdong 510500)
Yang Xuegui
(College of Mechanical Engineering,Qingdao Institute of Chemical Technology, Qingdao,Shandong 266042)

　　Abstract:Finite element analysis model of 9.00 R 20 radial tire was built and the static stress－strain distribution in the contact area was analyzed.The material and geometric nonlinear properties,and the anisotropic property of composite materials as well as uncompressible property of vulcanized rubber were studied.The effects of quantity of deflection, inflated pressure and friction coefficient on stress distribution in the contacting area were analyzed.The result showed that at constant inflated pressure,the contact shape changed from circle to ellipse then in turn to rectangular. The stress distribution in contact area changed from inner higher and outer lower into inner lower and outer higher.Friction force was axisymmetrical and its quantity was not large on static contact condition.The stresses of tire cord and tire ring on contacting area were higher.Inflated pressure had effect on sinking of warpage.Sinking decreased with the increase of inflated pressure.The largest stress on contact area increased with the increase of inflated pressure.
　　Keywords:radial tire;contact deflection; nonlinear finite element analysis

基金项目:国家自然科学基金资助项目(59603001)；广东省“人才引进工程”基金资助项目(990002)。
作者简介：李丽娟，女，1966年生，博士，教授。主要研究方向为结构力学、结构分析。
李丽娟（广东工业大学建设学院，广东广州510500）
刘锋（广东工业大学建设学院，广东广州510500）
杨学贵（青岛化工学院机械工程学院，山东青岛266042）

参考文献

1，庄继德.汽车轮胎学[M].北京:北京理工大学出版社,1996
2，俞淇,戴元坎,张凯.静负荷下轮胎接地压力分布测试的研究[J].轮胎工业,1999,(4):203～207
3，唐萌,张翼.子午线轮胎静态下沉问题的三维有限元分析[J].轮胎工业,1999,(1):3～6
4，Akasak T,Katoh M,Nikei S,et al.Two－dimension contact pressure distribution of a radial tire[J].Tire Science and Technology,1990,18(2):80～103
5，Karami G,Zohari H,Setoved E.Footprint analysis of bias tires under inflation and working load by finite element method[A].IPC′97[C].Malaysia: 1997.875～882
6，Yeoh O H.Characterization of elastic properties of carbon black filled rubber vulcanization[J].Rubber Chem Tech,1990,63(5):792～805
7，王登祥.轮胎胶料有限元分析的实验基础及计算[A]第十届全国轮胎技术研讨会论文集[C].张家 界:1998.23～31
8，刘连云.钢丝帘线泊松比的理论计算[A].第十届全国轮胎技术研讨会论文集[C].张家界:1998.193～196
9，Zhang F.Isotropic versus orthotropic model with MARC of composite tire structures subjected to inflation and ground interaction loads[M].Buffalo,NY:Dunlop Tire Corporation

收稿日期：2000－01－10