吴大鸣　 李晓林　

参考文献：

［1］塔德莫尔 Z,戈戈斯 C G.聚合物加工原理 [M].耿孝正,阎琦,许澍华译.北京:化学工业出版社,1990
［2］Fyrillas M,Georgiou G,Vlassopoulos D,et al.A mechanism for extrusion instabilities in polymer melts[J].Polym Eng Sci,1999,39(12):2 498～ 2 504
［3］操亚平.高聚物精密挤出机理初探 ( Ⅰ ) :影响高聚物精密挤出的工艺因素 [D].北京:北京化工大学,2001
［4］朱复华.挤出理论及其应用 [M].北京:北京轻工出版社,2000
［5］Potentea H,Jungemann J.Pressure through output behaviour in the melting section[J].J Polym Eng,2000,20(5):329～ 350
［6］Bigg D M.The effect of solid conveyance on the stability of the single screw extrusion process[J].Advance in Polymer Technology,1987,7(2):147～ 154
［7］Fenner R T,Dcox A P,Isherwood D P.Surge in screw extrusion[J],Polymer,1979,20(6):733～ 736
［8］刘会举.高聚物精密挤出机理初探 ( Ⅱ ):影响高聚物精密挤出的设备因素 [D].北京:北京化工大学,2001
［9］Covas J A,Cunha A G,Oliveira P.An optimization approach to practical problems in plasticating single screw extrusion[J].Polym Eng Sci,1999,39(3):443～ 456
［10］Tadmor Z,Klein I.Engineering principle of plasticating extrusion[M].New York: Van Nostrand Reinhold Company,1970
［11］张有忱,马萍,张美麟,等.带传动弹性滑动率研究 [J].北京化工大学学报,2000,27(2): 42～ 45
［12］Reimann D.Innovations for pipe and profile downstream equipment[A].Extrusion Technology: From Milestone to Milestone [C].Germany Battenfeld,2000.124～ 129
［13］Wilczynski K.Sigle screw extrusion model for plasticating extruders[J].Polym- Plast Technol Eng,1999,38(4):581～ 609
［14］Ronald G.The Structure and Rheology of Complex Fluids[M].London:Oxford University,1999
［15］Miller R W.Flow Measurement Engineering Handbook[M].USA:McGraw- Hill Book Company,1983
［16］Aaron J,Jeffrey A.Postdie extrusion of plastic pipe[J].Polym- Plast Technol Eng,2000,39(1):23～ 46
［17］泽田庆司.挤出成型最新进展 [J].塑料 (日文 ),2000,48(5):10～ 17
［18］钟松.失重计量配料系统在 BOPP生产线上的应用 [J].中国塑料,2001,15(7): 75～ 77