|
合成橡胶工业 |
 |
|
合成橡胶工业 |
|
氟橡胶接枝γ-丙烯酰氧基丙基三甲氧基硅烷对氟橡胶/硅橡胶共混物的增容作用 郭建华 曾幸荣 罗权焜 摘 要：采用化学接枝法制备氟橡胶接枝γ-丙烯酰氧基丙基三甲氧基硅烷,将其作为氟橡胶/硅橡胶共混物的增容剂,研究了增容剂用量对共混物物理机械性能的影响,并通过动态黏弹仪表征了共混物的相容性.结果表明,当增容剂质量分数不超过11.8%时,共混物的物理机械性能随着增容剂用量的增加而提高,氟橡胶和硅橡胶的相容性得到改善. Compatibilization of fluororubber grafting on γ-methacryloxypropyl-trimethoxysilane for fluororubber/silicone rubber blends
Guo Jianhua（School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China）
Zeng Xingrong（School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China）
Luo Quankun（School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China）
|
Fluororubber (FKM) is well known for its good resistance to heat and aggressive fluid but lack of low temperature resistance. Silicone rubber (MVQ) exhibits good high temperature stability, low temperature flexibility, weatherability and electrical properties. However, MVQ is lack of oil resistance. Blending FKM and MVQ might enhance low temperature properties of FKM and improve oil resistance of MVQ. In FKM/MVQ blends, MVQ can be partially substituted for important and expensive FKM. While MVQ and FKM are thermodynamically immiscible, FKM/MVQ blends show low mechanical properties due to its poor interfacial interaction. Therefore, some compatibilizers should be used in the blends to improve the compatibility.…… |
| 基金项目：Supported by Open Foundation of Key Laboratory of High Performance; Functional Polymer Materials of Guangdong Province; 2007′ Huizhou Science and Technology Program Item (2007 I 58). 作者简介：Biography: Guo Jianhua, instructor. 作者单位：郭建华（华南理工大学,材料科学与工程学院,广东,广州,510640） 曾幸荣（华南理工大学,材料科学与工程学院,广东,广州,510640） 罗权焜（华南理工大学,材料科学与工程学院,广东,广州,510640） |
|
收稿日期：2009年3月23日 出版日期：2009年11月15日 |
请看PDF全文
