压坨结构形式变化对混炼过程影响的研究

汪传生　 程源　

摘　要：通过在X(S)M-1.7密炼机上进行的3种不同构型的压砣试验,探讨了压砣结构形式变化对密炼机混炼过程中产生的影响。根据消耗的最大功率、混炼时间和生产能力、单位能耗、排胶温度、炭黑分散和物理性能,找出适宜X(S)M-1.7密炼机最佳压砣结构形式是e型结构。
关键词：密炼机；压砣结构；混炼；物理性能
分类号：TQ330.4⁺3　文献标识码：A
文章编号：1000-890X（2000）01-0028-05

Influence of ram configuration on mixing process

WANG Chuan-sheng
(Qingdao Institute of Chemical Technology,Qingdao 266042)
CHENG Yuan
(Beijing University of Chemical Technology,Beijing 100029)

Abstract：The influence of the ram configuration on mixing process was investigated through the test on three different ram configurations of X9S)M-1.7 internal mixer.It was found through the analysis of maximum consumed power,mixing time,capacity,specific energy consumption,dumping temperature,carbon black dispersity and physical properties of compound that the optimum ram configuration suitable for X(S)M-1.7 internal mixer was“e”configuration.
Keywords：internal mixer;ram configuration;mixing

参考文献：

［1］White J L.Development of internal mixer technology for the rubber induxtry[J].Rubb.Chem.Tech.,1992,65(3):527.
［2］沃斯特罗克努托克 E T.生胶和混炼胶的加工[M].周彦豪译.北京:化学工业出版社,1985.188.
［3］汪传生.用功率曲线控制密炼机排胶的实验分析[J].特种橡胶制品,1995,16(5):46.

收稿日期：1999-08-16