基金项目：广东省自然科学基金资助项目(5300977)
作者简介：凌育赵(1967-),男,广东平远人,仲恺农业技术学院实验师,从事实验教学及应用化学研究工作.
作者单位：凌育赵（仲恺农业技术学院,化学化工系,广东,广州,510225）
严志云（仲恺农业技术学院,化学化工系,广东,广州,510225）
参考文献：
[1]董卫国.高性能纤维表面处理技术[J].山东纺织科技,2001,11(6):44-46.
[2]Ramazan B,Tesoro C G.Effect of surface-limited reaction on the properties of Kevlar fibers[J].Textile Research Journal,1990,10(7):334-344.
[3]Benrashid R,Babich M W,Nelson G L.Flammability study of wallboard containing thermal storage materials--methods to improve flame retardancy of treated wallboard[J].Journal of Fire Sciences,1996,14(2):128-143.
[4]Tarantili P A,Andreopoules A G.Mechanical properties of epoxies reinforced with chloride-treated aramid fibers[J].Journal of Applied Polymer Science,1997,65(2):267-275.
[5]雷渭媛,高柳素夫.N-接枝环氧化合物的表面特性[J].宇航材料工艺,1995,25(5):37-40.
[6]袁海根,王汝敏,艾涛.表面处理对Kevlar纤维复合材料界面结合强度的影响[J].化学推进剂与高分子材料,2005,3(5):38-40.
[7]于涛,顾伯勤,陈哗,等.芳纶表面处理对纤维增强橡胶基复合密封材料性能的影响[J].润滑与密封,2005,167(1):71-72.
[8]Oh T S,Lee Y J.Manufacture of Kevlar containing nitrile butadiene rubber using silane coupling agent[J].Synthetic Elastomers and Natural Rubber,2000,15(1):115-126.
[9]Doherty M A,Rijpkema B,Weening W.Promoting aramid-rubber adhesion without epoxies--an alternative approach[J].Rubber World,1995,216(6):21-24.
[10]王维相,翁亚栋.芳纶在橡胶制品中的应用概况[J].橡胶工业,2004,51(7):436-439.
[11]宋月贤,郑元锁,袁安国,等.芳纶帘线与NR的粘合性能研究[J].橡胶工业,1998,45(11):660-662.
[12]刘继涛,黄莉茜,张庆,等.芳纶帘线的浸胶工艺对其与橡胶粘合性能的影响[J].苏州丝绸工学院学报,2000,20(1):51-54.
[13]朱凤娟,胡白年.提高芳纶帘线与橡胶粘合性的研究[J].产业用纺织品,2000,18(10):30-33.
[14]Ma Y M,Castino F.Fracture toughness of Kevlar epoxy composites with controlled interfacial bonding[J].Journal of Material Scicnce,1984,19(6):1 638-1 655.
[15]Rijpkema B,Weening W E.RFL粘合剂的力学性能及对橡胶与帘线复合材料的影响[J].徐晓岚译.橡胶译丛,1996(1):35-42.
[16]Janssen H.聚酯和芳纶与EPDM及HNBR橡胶粘合的界面研究[J].宋月贤译.橡胶译丛,1996(5):286-288.
[17]Ooij V,Wim J,Luo S J,et al.Surface modification of textile fibers and cords by plasma polymerization[J].Plasmas and Polymers,1999,4(1):33-55.
[18]Kaplan,Stephen L,Hansen,et al.Gas plasma treatment of Kevlar and spectra fabrics for advanced composites[J].Composites for Real World International SAMPE Technical Conference,1997,29(2):256-278.
[19]严志云,刘安华,贾德民.冷等离子体处理芳纶帘线的表面结构形态及其与橡胶粘合性能的研究[J].橡胶科技市场,2005,3(14):14-17.
[20]Sen G S.Plasma surface modification of advanced organicfibres[J].Composites Science and Technology,1994,52(4):20-27.
[21]Salehi M H,Ait K A,Brisson J.Improvement of mechanical properties of composites through polyamide grafting onto Kevlar fibers[J].Polymer Engineering Science,1996,36(6):778-785.
[22]Wang Q,Kaliaguine S.Catalytic grafting:a new technique for polymer-fiber composites.Ⅲ.Polyethylene-plasma-treated Kevlar fibers composites:analysis of the fiber surface[J].Journal of Applied Polymer Science,1993,48(1):121-136.
[23]Shi J L,Wim J,Van O.Surface modification of textile tire cords by plasma polymerization for improvement of rubber adhesion[J].Rubber Chemistry and Technology,2000,73(1):121-137.
[24]Shaker M,Kamel I,Ko F,et al.Improvement of the interfacial adhesion between Kevlar fiber and resin by using R-F plasma[J].Journal of Composites Technology & Research,1996,18(4):249-255.
[25]严志云,刘安华,贾德民.超声波处理对芳纶帘线表面形态及与胶料粘合性能的影响[J].橡胶工业,2004,51(6):325-329.
|
