橡塑技术与装备010502-橡胶技术网 www.sto.net.cn

	橡塑技术与装备 CHINA RUBBER/PLASTICS TECHNOLOGY AND EQUIPMENT 2001 Vol.27 No.5 P.8-13

塑料模压成型技术(三)

Plastics Compression Molding Technology (Part 3)

黄汉雄　

摘　要：主要介绍模压成型的设备(包括模压机和模具),并简述模压成型的工艺参数.
关键词：模压成型;模压机;模具;工艺参数
分类号：TQ330.661　文献标识码：A
文章编号：1009-797X(2001)05-008-06

作者简介：黄汉雄,见本刊2001年第2期.
作者单位：黄汉雄（华南理工大学,广州,510640）　

参考文献：

[1]Tucker Ⅲ C L. Compression Molding of Polymers and Composites. In:Isayev A I. ed. Injection and Compression Molding Fundamentals[M]. New York:Marcel Dekker,1987,481.
[2]Chabot J F Jr. The Development of Plastics Processing Machinery and Methods[M]. New York:John Wiley & Sons,1992.49.
[3]Naitove M H. Plast. Technol. 1990,36(2):38.
[4]Buckley D T. Modern Plast. 1998,75(12):D-39.
[5]Evans B. Plast. Technol. 1990,36(3):64.
[6]Anon. Plast. World. 1992,50(4):95.
[7]Anon. Modern Plast. Inter. 1994,24(2):12.
[8]Anon. Modern Plast. Inter. 1998,28(6):16.
[9]Anon. Modern Plast. Inter. 1998,28(7):132.
[10]Mapleston P. Modern Plast. Inter. 1993,23(8):35.
[11]Anon. Modern Plast. Inter. 1995,25(7):124.
[12]Lindsay K F. Modern Plast. Inter. 1993,23(11):27.
[13]Rosato D V,Rosato D V. Plastics Processing Data Handbook[M].New York:Van Nostrand Reinhold,1990,232.
[14]Frados J. Plastics Engineering Handbook of the Society of the Plastics Industry,Inc[M]. 4th ed. New York:Van Nostrand Reinhold,1976,204.
[15]Mark H F,Bikales N M,Overberger C G,Menges G. Encyclopedia of Polymer Science and Engineering[M]. 2nd ed. New York:John Wiley & Sons,1986. 79.
[16]黄锐编.塑料工程手册[M].北京:机械工业出版社,2000.
[17]梁国正,顾媛娟编.模压成型技术[M].北京:化学工业出版社,1999.
[18]Grandilli P A. Technician's Handbook of Plastics[M]. New York:Van Nostrand Reinhold,1981. 111.
[19]Omastova M,Simon F. J. Mater. Sci. 2000,35:1743.
[20]Griskey R G. Polymer Process Engineering[M]. New York:Chapman & Hall,1995. 349.
[21]Neate J A et al. Modern Plast. Inter. 1994,24(3):86.
[22]Miller B. Plast. World. 1992,50(11):27.
[23]Monks R,Naitove M H. Plast. Technol. 1993,39(4):35.
[24]Anon. Modern Plast. Inter. 1995,25(3):78.
[25]Mapleston P,Moore S. Modern Plast. Inter. 1994,24(10):54.
[26]Anon. Plast. World. 1992,50(5):69.
[27]缪京媛,叶牧.氟塑料-加工与实用[M].北京:化学工业出版社,1987.
[28]Strong A B. Plastics:materials and processing[M]. New Jersey:Prentice-Hall,1996,459.
[29]Chanda M,Roy S K. Plastics Technology Handbook[M]. 2nd ed.New York:Marcel Dekker,1993,139.
[30]DuBois J H,Pribble W I. Plastics Mold Engineering Handbook[M].3rd ed. New York:Van Nostrand Reinhold,1978.
[31]Monk J F. Thermosetting Plastics:practical moulding technology[M]. London:George Godwin,1981,40.
[32]Meyer R W. Handbook of Polyester Molding Compounds and Molding Technology[M]. New York:Chapman & Hall,1987.179.

收稿日期：2001年4月10日

出版日期：2001年5月1日

请看PDF全文