作者简介：李晓静(1979-),女,在读硕士,现就读于华南理工大学工业装备与控制工程学院,主要从事聚合物共混物加工的研究.
作者单位：李晓静（华南理工大学工业装备与控制工程学院,塑料橡胶装备及智能化研究中心,广东,广州,510640）
黄汉雄（华南理工大学工业装备与控制工程学院,塑料橡胶装备及智能化研究中心,广东,广州,510640）
参考文献：
[1]B. Ohlsson, H. Hassander, B. Tornell. Improved compatibility between polyamide and polypropylene by the use of maleic anhydride grafted SEBS. Polymer,1998, 39: 6705.
[2]S.C. Wong, Y. W. Mai. Phase structure in polypropylene/PA6/SEBS blends. Polymer, 1999, 40:1 553.
[3]A.N. Wilkinson, L. Laugel, M. L. Clemens. Phase structure in polypropylene/PA6/SEBS blends. Polymer,1999, 40:4 971.
[4]S, C. Wong, Y.W. Mai. Effect of rubber functionality on microstructures and fracture toughness of impactmodified nylon 66/polypropylene blends Part Ⅱ.Toughening mechanisms. Polymer, 2000, 41:5 471.
[5]F.P. Tseng, J. J. Lin, C. R. Tseng, et.al. Poly (oxypropylene) -amide grafted polypropylene as novel compatibilizer for PP and PA6 blends. Polymer, 2001,42: 713.
[6]M.V. Tsebenvko, N. M. Rezanova, A. P. Nikolaeva.Effect of sodium oleate addition on the morphology of polypropylene-co-polyamide blends. Polym. Eng. Sci.,1999, 39:1 014.
[7]B. Ohlsson, H. Hassander, B. Tornell. Effect of the mixing procedure on the morphology and properties of compatibilized polypropylene/polyamide blends.Polymer. 1998, 39:4 715.
[8]J. Rosch, R. Mulhaupt. Deformation behavior of Polypropylene/Polyamide blends. J. Appl. Polym. Sci.,1995, 56:1 607.
[9]D. Godshall, C.White, G. L. Wilkes. Preparation of shell-core binary fibers of Iso-PolypropylenePolyamide 6, J. Appl. Polym. Sci., 2001, 80: 130.
[10]J. D. Tucker, S. Lee, R. L. Einsporn. Effects of PP-gMA and SEBS-g-MA on mechanics and morphologies of PP/PA6. Polym. Eng. Sci, 2000, 40:2 577.
[11]H. G. Li, T. Chiba, N. Higashida. Polymer-polymer interface in polypropylene/polyamide blends by reactive processing. Polymer, 1997. 38:3 921.
[12]S. C. Tjong. Falling weight impact properties of maleic anhydride compatibilized polypropylene-polyamide blends.J. Mater. Sci, 1997. 32: 4613.
[13]杜强国,王海荣,李雅.尼龙6中氨基含量对尼龙6/EVA共混物中击韧性的影响.复旦学报(自然科学版),1995,3:515.
[14]杨明山.尼龙6与改性PP的共混研究.高分子材料科学与工程,1996,12(3):85.
[15]邱有德,熊政治.增强PA6/PP合金的研究.现代塑料加工应用,1997,9(4):1
[16]李笃信,贾德,郭宝春.PP-g-DBM增容PP/PA6共混物的性能研究,工程塑料应用,2000,28(8):31
[17]李笃信,贾德民.增容PP/PA6共混物的界面相互作用.现代塑料加工应用,2000,12(6):21
[18]李笃信,贾德民.PP-g-DBM增容PP/PA6共混物性能研究.中国塑料,2000,14(7):30.
[19]解孝林,李伯耿,陈媛,等.RMA增容PA6/PP共混物的形态结构与增容机理.材料科学与工程,1999,15(5):107.
[20]张景春,谢续明,郭宝华.Pp-g-(GMA-co-St)增容PA6的形态结构研究.高分子学报,2002,3:282.
[21]吴智华,倪海鹰,程军,等.填充增强PA6/PP合金的性能.工程塑料应用,1999,27(6):5
[22]陈哲,王琪,徐僖.超细聚酰胺6粒子蹭韧聚丙烯体系的研究.高分子材料科学与工程,2001,17(1);14.
[23]刘长生,王琪.力化学法制备PP-g-HMA增容PA6/PP/硅灰石复合材料的形态和力学性能.高分子材料科学与工程,2000,16(4):61.
[24]J. Duvall, C. Sellittl, C. Myers. Effect ofcompatibilization on the properties of polypropylene/polyamide-66(75/25wt) blends. J. Appl. Polym. Sci., 1994, 52:195.
[25]M. Ulrich, C. Caze, P. Laroche. Morphological studies of glass-microbead-filled polyamide 66-polypropylene blends. J. Appl. Polym Sci, 1998, 67: 201.
[26]T. Tang, B. T. Huang. Crystallization effect on morphology of PP/PA12 blends. Polymer, 1995, 36:5 061.
[27]X.M. Zhang, J. H. Yin. Interaction characterization of PA1010/PP blends using PP-g-AA as compatibilizer.Polym. Eng. Sci., 1997, 37: 197.
[28]李战雄.尼龙11共混改性及流变性研究.华北工学院硕士学位论文,1996.
[29]Z. Z. Liang, H. L. Williams. Dynamic mechanical properties of polypropylene polyamide blends: effect of compatibilization. J. Appl. Polym. Sci, 1992, 44: 699.
[30]Fujino, Kenichi, Usui. Polyamide-modified polyolefinic composition and uses thereof. U.S. 531164,2002.
[31]B. D. Dean. Blends of impact modified styrene/maleic anhydride copolymers with Nylonll and Nylon 12. J.Elas. Plas, 1985, 17: 55.
[32]S. Tyagi, A. K. Ghosh. Morphology development during blending of immiscible polymers in screw extruders.Polym. Eng. Sci., 2002, 42: 1 309.
[33]段建华,张蹭民.PA/PP/SEBS三元合金的结构与性能.中国塑料,1995,9(6):40.
[34]Y. C. Ou, Y. G. Lei, X. P. Fang. Maleic anhydride grafted thermoplastic elastomer as an interfacial modifier for Polypropylene/Polyamide 6 blends. J. Appl. Polym.Sci, 2004, 91:1 806.
[35]H. G. Li, C. Tsuneo, N. Higashida. Polymer-polymer interface in polypropylene/polyamide blends by reactive processing. Polymer, 1997, 38: 3921.
[36]H. Potente, M. Bastian, K. Bergemann. Morphology of polymer blends in the melting section of co-rotating twin screw extruders. Polym. Eng. Sci., 2001, 41: 222.
[37]H. Potente, S. Krawinkel, M. Bastian. Investigation of the melting behavior and morphology development of polymer blends in the melting zone of twin-screw extruders . J. Appl. Polym. Sci, 2001, 82:1 986.
[38]H. Potente, M. Bastian, A. Gehring. Experimental investigation of the morphology development of polyblends in corotating twin-screw extruders. J. Appl.Polym. Sci, 2000, 76: 708.
[39]H. Cartier, G. H. Hu. Morphology development of in sifu compatibilized semicrystalline polymer blends in a co-rotating twin-screw extruder. Polym. Eng. Sci.,1999, 39: 996.
[40]宋国君,任长娟,吕翠莲.PP-g-MAH原位反应增容PP/PA6共混纤维的研究.塑料科技,1995(2):9.
[41]K. L. Borve, H. K. Kotlar, C.-G. Gustafson. Polypropylene-Phenol formaldehyde-based compatibilizers. II.Application in PP/PA6 75/25 (wt/wt) blends. J. Appl.Polym. Sci, 2000. 75: 355.
[42]S. N. Sathe, S. Devi, G. S. Srinivasa. Relationship between morphology and mechanical properties of binary and compatibilized ternary blends of polypropylene and nylon 6. J. Appl. Polym. Sci, 1996, 61: 97.
[43]O. T. Ikkala, R. M. Miettinen, J. Seppala. Effects of compatibilization on fractionated crystallization of PA6/PP blends. J. Appl. polym. Sci., 1993, 49:1 165.
[44]P.L.Beltrame, A. Castelli, M. Di Pasquantonio.Influence of interfacial agents on the physicochemical characteristics of binary Polyethylene/Polyamide 6 and ternary Polyethylene/Polypropylene/Polyamide 6 blends.J. Appl. polym. Sci., 1996, 60: 579.
[45]E. Turati, A .Vitale, M . Gallazzi. Melt rheology of miscible or compatibilized polymer blends obtained from polyamidic and polyolefinic polymers. Adv. Polym.Sci.,1998,17;317.
[46]吴石山,杨阳,李乔钧.PP-g-MAH共混物流变性能的研究.中国塑料.1999,13(2):33.
[47]肖力光,于水.增容剂对PP/PA6共混体系相容性的影响吉林建筑工程学院学报,2002,19(1):39.
[48]解孝林,李伯耿,申屠宝卿.R-SMA增容PA6/PP共混物的形态结构与流变行为.工程塑料应用,1997,25(5):50.
[49]J. D. Lee, S. M. Yang. Effects of mixing porcedures on properties of compatibilized polypropylene/nylon6 blends. Polym. Eng. Sci, 1995. 35:1 821.
[50]H. X. Li, G. H. Hu. The early stage of the morphology development of immiscible polymer blends during melt blending: compatibilized vs. Uncompatibilized blends.J. Polym. Sci., Part B: Polym. Phy, 2001, 39: 601.
[51]N. Zeng, S. L. Bai, C. G'Sell. Study on the microstructures and mechanical behaviour of compatibilized polypropylene/polyamide-6 blends. Polym Inter, 2002,51: 1 439.
[52]S. Dean, Z. Ke, J. H. Yang. Rheology and morphology of reactively compatibilized PP/PA6 blends.Macromolecules, 2002, 35:8 005.
[53]H. X. Huang, Y. F. Huang, S. L. Yang. Developing laminar morphology in higher-viscosity-ratio polyblends by controlling flow fields in a single-screw extruder. Polym. Inter, 2005, 54: 65～69.
