作者简介：熊辉(1984-),男,北京化工大学机电工程学院在读研究生,机电一体化专业,主要研究方向为物料停留时间分布测试装置与方法.
作者单位：熊辉（北京化工大学机电工程学院,北京,100029）
冯连勋（北京化工大学机电工程学院,北京,100029）
方辉（北京化工大学机电工程学院,北京,100029）
参考文献：
[1]Richard Gendron,Louis E.Daigneault,Jacques Tatibouet,Michel M.Dumoulin.Residence Time Distribution in Extruders Determined by InLine Ultrasonic Measurements[J].Advanced in Polymer Technology,1996,15(2):111～125.
[2]Z.Sun,C.-K.Jen,C.-K.Shih,D.A.Denelsbeck.Application of Ultrasound in the Determination of Fundamental Extrusion Performance Residence Time Distribution Measurement[J].Polymer Engineering and Science,2003,43 (1):102～111.
[3]Yvan Chalamet,Mohamed Taha.In-Line Residence Time Distribution of Dicarboxylic Acid Oligomers/Dioxazoline Chain Extension by Reactive Extrusion[J].Polymer Engineering and Science,1999,39(2):347～355.
[4]Sang Myung Lee,Jong Cheol Park,Sang Mook Lee,Young Joon Ahn,Jae Wook Lee,In-Line Measurement of Residence Time Distribution in Twin-Screw Extruder Using Non-Destructive Ultrasound[J].Korea-Australia Rheology Journal,2005,17 (2),87～95.
[5]Jun Gao,Gregory C.Walsh,David Bigio.Mean Residence Time Analysis for Twin Screw Extruders[J].Polymer Engineering and Science,2000,40 (1):227～237.
[6]Tomas Jeferson A.Melo.An Optical Device to Measure In-Line Residence Time Distribution Curves During Extrusion[J].Polymer Engineering and Science,2002,42 (1):170～181.
[7]Tomas JefersonA.Melo,Sebastiao V.Canevarolo.In-Line Optical Detection in the Transient State of Extrusion Polymer Blending and Reactive Processing[J].Polymer Engineering and Science,2005,45 (1):11～19.
[8]C.Gilmor,S.T.Balke,In-Line Color Monitoring of Polymers During Extrusion Using a Charge Coupled Device Spectrometer Color Changeovers and Residence Time Distributions[J].Polymer Engineering and Science,2003,43 (2):356～368.
[9]Ajay Kumar,Girish M.Ganjyal,David D.Jones,Milford A.Hanna.Digital Image Processing for Measurement of Residence Time Distribution in a Laboratory Extruder[J].Journal of Food Engineering,2006,75 (2):237～244.
[10]Guo-HuaHu,Ilham Kadri.On-Line Measurement of the Residence Time Distribution In Screw Extruders[J].Polymer Engineering and Science,1999,39 (5):930～939.
[11]王炉钢,冯连芳,许忠斌,顾雪萍,王嘉骏.挤出过程物料停留时间分布的在线测量和模型[J].合成橡胶工业,2005,28(3):170～173.
[12]宋晓波,许忠斌,冯连芳,张先明.齿形盘元件的局部停留时间分布[J]中国塑料,2006,20(2):93～98.
[13]王炉钢.双螺杆挤出机停留时间分布的在线测量[D].浙江:浙江大学,2005,18～25.
[14]许忠斌,冯连芳,王炉钢,张才亮.聚合物挤出过程停留时间分布的在线检测新方法[C].上海:清华大学高分子研究所,2004
[15]王炉钢,冯连芳,许忠斌,李广赞,双螺杆挤出机停留时间分布的在线测定[C].上海:清华大学高分子研究所,2004.
[16]Xian-Ming Zhang,Zhong-Bin Xu,Lian-Fang Feng,Xiao-Bo Song.Assessing Local Residence Time Distributions in Screw Extruders through a New In-Line Measurement Instrument[J].Polymer Engineering and Science,2006,46 (4):510～519.
[17]宋小波.双螺杆挤出机中局部停留时间分布研究[D].浙江:浙江大学,2005,10～50.
[18]A.Poulesquen,B.Vergens,P.Cassagnau,A.Michel.A Study of Residence Time Distribution in Co-Rotating Twin-Screw Extruders.Part2:experimental validation[J].Polymer Engineering and Science,2003,43(12):1849～1862.
[19]S.Hoppe,C.Detrez F.PIa.Modeling of a Cokneader for the Manufacturing of Composite Materials Having Absorbent Properties at Ultra-High-Frequency Waves.Part 1:Modeling of Flow from Residence Time Distribution Investigations[J].Polymer Engineering and Science,2002,42 (4):771～780.
[20]P.Cassagnau,M.Courmont,F.Melis,J.P.Puaux.Study of Mixing of Liquid Polymer in Twin Screw Extruder by Residence Time Distribution[J].Polymer Engineering and Science,2005,45 (7):926～934.
[21]D.Wolf,D.H.White.Experimental Study of the Residence Time Distribution in Plasticating Screw Extruders[J].AICHE J,1976,22 (1),122～131.
[22]Gifford Shearer,Costas Tzoganakis.The Effects of Kneading Block Design and Operating Conditions on Distributive Mixing in Twin Screw Extruders[J].Polymer Engineering and Science,2000,40 (5):1095～1106.
[23]Emine Unlu,James F.Faller.Geometric Mean vs Arithmetic Mean in Extrusion Residence Time Studies[J].Polymer Engineering and Science,2001,41 (5):743～751.
[24]R.M.Van Den,Einde P.Kroon,A.J.Van Der Goot,R.M.Boom.Local Mixing Effects of Screw Elements During Extrusion[J].Polymer Engineering and Science,2005,45 (3):271～278.
[25]马秀清.非啮合双螺杆挤出过程停留时间分布实验研究[J].中国塑料,2002,16(12):90～92
[26]马秀清.啮合同向双螺杆挤出过程停留时间分布实验研究[J].中国塑料,2003,17(9):85～88.
[27]马秀清.啮合异向双螺杆挤出过程停留时间分布实验研究[J].中国塑料,2003,17(11):8l～84.
[28]Gifford Shearer,Costas Tzoganakis.Relationship Between Local Residence Time and Distributive Mixing in Sections of A Twin-Screw Extruder[J].Polymer Engineering and Science,2002,41 (12):2206～2215.
